Festina 0S11 Bedienungsanleitung PDF herunterladen

INSTRUCTION MANUAL FOR MIYOTA WATCH MOVEMENT

CALIBER NO. 0S11

CHRONOGRAPH FUNCTION: CENTER SECOND HAND CHRONOGRAPH 1/1 sec. Timing

up to 59 minutes 59 seconds

BATTERY: SR927W

A) DISPLAYS AND BUTTONS

B) SETTING THE TIME

C) SETTING THE DATE

D) USING THE CHRONOGRAPH

E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY)

B) SETTING THE TIME

1. Pull the crown out to the 2nd position.

2. Turn the crown to set hour and minute hands.

3. When the crown is pushed back to the normal position, small second hand begins to run.

C) SETTING THE DATE

1. Pull the crown out to the 1st position.

2. Turn the crown counter-clockwise to set the date.

*If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not change on the

following day.

3. After the date has been set, push the crown back to the normal position.

D) USING THE CHRONOGRAPH

This chronograph is able to measure and display time in 1/1 second united up to maxinum of 59 minutes

59 seconds.

The chronograph 1/1 second hand keeps continuously for 59 minutes 59 seconds after starting.

Measuring time with the chronograph

1. The chronograph can be started and stopped each time button "A" is pressed.

2. Pressing button "B" resets the chronograph and the chronograph second hand and chronograph minute

hand return to zero position.

" A "

RESET

" A "

TIME MEASUREMENT STOP

" B"

" A "

" B "

E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY)

This procedure shoud be performed when the chronograph second hand does not return to zero position

after the chronograph has been reset, and including after the battery has been replaced.

1. Pull the crown out to the 2nd position.

2. Press button "A" to set the chronograph second hand to the zero position. The chronograph hand can

be advanced rapidly by continuously pressing button "A".

3. Once the hand have been zeroed, return the crown to the normal position.

* Do not push crown to normal position while the chronograph second hand returns to zero position.It

stops on the way when crown are returned to normal position and its position is recognized as zero

position.

MIYOTA

UNIVERSAL MASTERPIECE BORN IN JAPAN

MADE IN JAPAN

METAL MOVEMENT

1st position

2nd position

Minute hand

Button A

Chronograph

second hand

Chronograph

minute hand

Button B

Hour hand

Second hand

Calendar

Normal crown position

A) DISPLAYS AND BUTTONS

1 2 3 4 5 6 7 8 9

Inhaltsverzeichnis

Seite 1 - METAL MOVEMENT

INSTRUCTION MANUAL FOR MIYOTA WATCH MOVEMENTCALIBER NO. 0S11CHRONOGRAPH FUNCTION: CENTER SECOND HAND CHRONOGRAPH 1/1 sec. Timing up to 59 minutes 59 s

Seite 2

ミヨタウォッチムーブメント取扱説明書キャリバー番号：OS11クロノグラフ機能：センタークロノ秒針1/1秒単位で最大59分59秒まで計測電池 : SR927WA) 表示部とボタンB) 時刻を合わせ方C) 日付を合わせ方D) クロノグラフの使い方E) クロノグラフリセット（電池交換の後など）B) 時刻を

Seite 3

BEDIENUNGSANLEITUNG FÜR MIYOTA UHRWERKKALIBER NR. 0S11Messfunktion des Chronographen: Chronograph mit mittlerem Sekundenzeiger 1/1 (1-Sekunden-Einheit

Seite 4

MODE D'EMPLOI DU MOUVEMENT DE MONTRE MIYOTACALIBRE : NO. OS11Fonction de chronographe : Chronomètre avec trotteuse au centre 1/1(seconde comme un

Seite 5

MANUAL DE INSTRUCCIONES DEL RELOJ MIYOTAN˚ DE CALIBRE OS11Fonction de chronographe : Cronógrafo con manecilla central de segundos 1/1(unidades de 1 se

Seite 6

MANUALE DI ISTRUZIONI PER IL MOVIMENTO DELL’OROLOGIO MIYOTACALIBRO NO. 0S11FUNZIONE DI CRONOGRAFO: Cronografo con lancetta centrale dei secondi 1/1(un

Seite 7

MANUAL DE INSTRUÇÕES PARA MOVIMENTO DO RELÓGIO MIYOTACALIBRE Nº OS11FUNÇÃO DE CRONÓGRAFO: Cronógrafo com ponteiro dos segundos central 1/1 (unidades d

Seite 8 - 誕生於日本的驚世傑作

MIYOTA 手錶使用說明書CALIBER NO. 0S11秒錶功能 : 中央秒針秒錶 1/1（以1秒鐘為單位）/測時限度為59分59秒。電池 : SR927WA) 顯示幕及各按鈕B) 時間的調整C) 日期的調整D) 秒錶的使用E) 秒錶的重設（更換電池之後等時）B) 時間的調整1. 將錶冠拉出至位

Seite 9

ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ ЧАСОВ «МИЁТА»КАЛИБР № 0S11ХРОНОГРАФИЧЕСКАЯ ФУНКЦИЯ — Хронограф с секундной стрелкой по центру 1/1 (деление -секунда)/Максим